- 非IC关键词
企业档案
供应低温电池零下负40度放电容量80%-90%,低温锂电池零下负55度放电
低温电池864468
华耐低温锂电池864468
产品信息
Product 产品: Lithium-ion Rechargeable cell 锂离子可充性电芯
Model (Type) 电芯型号: LCR864468P-2300mAh
Designation名称：
HN——LC R
① Indicates the manufacturing plant 代表厂家名称
② Indicates the property of the cell代表电池性能
The letter "LC" difines LiCoO2 series cathode Lithium-ion cell
“LC”代表以LiCoO2为正极材料体系的锂离子电池
③ Indicates the case material of the cell 代表电池壳体材质
The letter “R”difines the aluminum plastic composite film
“R”代表电池的壳体材质是铝塑复合膜
④ Indicates the dimension of the cell 代表电池尺寸
The letter "86" difines the thickness of cell
|
项目 |
规格（mm） |
|
L2 |
10±1.0 |
|
L1 |
≤68 |
|
W |
≤44 |
|
T |
≤8.6 |
“86”代表电池厚度是8.6mm
⑤ Indicates the dimension of the cell 代表电池尺寸
The letter "44" difines the width of cell
“44”代表电池宽度是44mm
⑥ Indicates the height of cell 代表电芯高度
The letter "68" difines the height of cell Figure A（图A）
“68”代表电池高度是68mm
3：Cell Size 电芯尺寸
For details,please refer to Figure A.
对于图形结构的详细资讯，请参阅图A。
4：Construction 电芯结构
A cell is consist of cathode,anode,seperator and the aluminum plastic composite film.
电芯由正极、负极、隔膜、和铝塑复合膜组成。
5.The Parameter Specification 基本参数
|
Item 项目 |
Specification 性能 |
Remark 备注 |
|
|
Nominal Capacity标称容量 |
2300mAh |
I3A discharge(I3A放电) |
|
|
Nominal Voltage标称电压 Full charge Voltage满充电压 Full discharge Voltage满放电压 |
3.7V 4.2±0.1V 2.75V |
|
|
|
Internal Impedance内阻 |
≤15mΩ |
|
|
|
Standard Charging Rate(current/time) 标准充电率 |
I5A |
I5A：0.2C |
|
|
Standard charging method 标准充电方法 |
I5A CC （constant current）charge to FC,then CV(constant voltage FC)charge till charge finish current decline to ≤0.05I5A I5A CC（恒流）充电至 FC，再 CV（恒压 FC）充电直至充电电流≤0.05I5A |
FC：4.2V |
|
|
Charging time 充电时间 |
Standard Charging (标准充电) Approx 6 hours 大约 6 小时 |
|
|
|
Max. charge current 充电电流 |
Constant Current I5A Constant Voltage FC 0.1I5A cut-off 持续电流：I5A 持续电压：FC 截止电流：￡0.1I5A |
|
|
|
Charge cut-off voltage 充电截止电压 |
The same as charge protectuin voltage同过充保护电压 |
|
|
|
Standard Discharging标准放电 |
Constant current I5A end voltage FD 持续电流：I5A 截止电压：FD |
FD：3V |
|
|
Discharging Ending Voltage 放电终止电压 |
The same as discharge protectuin voltage同过放保护电压 |
|
|
|
Pulse discharge current (time /时间￡10S) 脉冲放电电流(时间￡10S) |
2.5I5A |
|
|
|
Storage temperature 储存温度 |
≤1 month |
(-20～60)℃; Humidity湿度:RH(65±20)% |
Percentage of recoverable capacity no less than 80% of the initial capacities 恢复容量不低于初始容量的 80% |
|
≤3 months |
(-20～45)℃; Humidity湿度:RH(65±20)% |
||
|
Recoverable capacity 恢复容量 |
Constant current I5A charge to FC, then constant voltage FC charge to current declines to 0.1I5A, rest for 10min，constant current I5A discharge to FD，rest for 10min.Repeat above steps 3 times, recording the maximum capacity . 先用 I5A 恒流充电至 FC，再恒压 FC 充电直至充电电流￡0.1I5A,搁置 10 分钟,再用 I5A 电流放电至 FD; 又搁置 10 分钟,重复以上步骤 3 次,记录容量值。 |
||
|
Appearance 外观 |
Without distortion and leakage无变形、电解液泄露 |
||
|
Battery Weight电池重量 |
Approx(约)：55±1g |
|
|
|
Standard testing condition 标准测试环境 |
Temperature(温度) Humidity（湿度） Atmospheric Pressure（大气压） |
15~35℃ 20%~80% The test field of atmospheric pressure（测试现场大气压力） |
|
Remark: 1.Operating temperature（使用温度）: charging(充电) 0℃~45℃; Discharging（放电）：-50℃~60℃